8 Best Bersa Thunder IWB Holsters | Bersa Thunder Holster

We tried out several different Bersa Thunder holsters and came up with this list of the 8 best Bersa Thunder IWB holsters. We prefer inside the waistband (IWB) holsters because they hold your gun securely, are easily concealable and highly comfortable.

The Bersa Thunder is a great concealed carry weapon and it’s an amazing concealed carry gun.

Let’s begin with our favorite and the one we recommend.

Texas Leathercraft Right Hand – Tucker & Byrd L2 Leather Tuckable IWB Holster – Bersa 380 Thunder

The L-2 IWB is a very comfortable, highly concealable inside-the-waistband holster. It is a tuckable holster that features adjustable cant and ride height and runs best right over your hip pocket. Made from hand boned Hermann Oak leather, this rough-side-out holster breathes easily and holds your sidearm comfortably with a high degree of stability.

It is a simple, long lasting and sturdy. It is also lightweight so it will not make it hard to walk, run, jog, or jump! The handgun will fit comfortably and will not fall out when bending over. It should provide you years of service and will be able to tolerate all types of weather along with tough handling.

This is the holster we recommend if you are looking for a long term holster and if you have a little more money to spend. Otherwise, the holster above made by Texas Leathercraft is the best in terms of quality and price.


Tucker Gun Leather Texas Heritage IWB Holster

All-leather IWB holster, ultra-concealable, tuckable, comfortable and very secure. This holster is for inside the waistband which has adjustable for ride height and cant angle, slim profile. This holster features a strong belt clip that secure the holster to the belt. The body is protected from gouging sharp edges and the handgun separated from perspiration and body salts. The holster will not collapse when the handgun is drawn.

This holster features a blocked out leather design that stabilizes the handgun. This one literally features a spine on both sides of the holster; otherwise, the forward rake design would not be stabilized for concealed carry. The advantage of the inside the waistband holster is that the body of the holster does not protrude past the belt line. A long jacket or a coat is not needed to properly conceal the handgun.


Texas Leathercraft Right Hand – Tucker & Byrd L4 Leather Tuckable IWB Holster – Bersa 380 Thunder

The L-4 IWB is a very comfortable, highly concealable inside-the-waistband holster. It is a tuckable holster that features adjustable cant and ride height and runs best right over your hip pocket. Made from hand boned Hermann Oak leather, this rough-side-out holster breathes easily and holds your sidearm comfortably with a high degree of stability.

It is a simple, long lasting and sturdy. It is also lightweight so it will not make it hard to walk, run, jog, or jump! The handgun will fit comfortably and will not fall out when bending over. It should provide you years of service and will be able to tolerate all types of weather along with tough handling.


Comp-Tac MTAC Holster – 1.50 Black Standard Clips


Behind-the-hip (4 o’clock position), tuckable, adjustable cant, slim profile, and adjustable ride depth, there is no way you can go wrong with this holster. This “hybrid” holster combines cowhide leather backing with a kydex half-shell mounted on the leather. The leather backing provides the desired comfort achieved by leather holsters. The kydex half-shell provides the reliable, consistent draw and re-holstering capabilities. Adjustable cant and ride depth the clips on the MTAC can be re-positioned to ride higher or lower on the holster. This allows the cant (angle) to be adjusted more or less depending on user preference. The ride depth can also be adjusted in the same manner. The interchangeable clips can be swapped out for different styles, colors, and belt widths.

Customers all over have written positive reviews about this holster. This holster is made by being modeled to the gun so it fits in perfectly and “clicks”. Due to this fit process, there may be small scuffs on the inside of the holster. This is normal and caused by the fit process.


Vedder Holsters LightTuck IWB Kydex Gun Holster- Bersa Thunder .380

Vedder Holsters LightTuck IWB Kydex Holster
The all new LightTuck holster by Vedder Holsters is the last holster you will ever need to buy for your carry gun. Each holster is handcrafted to your precise gun model to create the perfect fit while maintaining the thinnest profile both in your pants and on your belt. Our fit is so precise, you will hear an audible ‘click’ every time you holster your gun, reassuring you that it is securely in place. Every LightTuck holster now comes with three adjustable ride height settings, 30 degrees of adjustable forward AND reverse cant angle (great for 3-5 o’clock carry, appendix, and crossdraw), and adjustable retention to meet your exact preference. Carry precisely the way you want with the LightTuck and to be comfortable and confident every time you carry! The sleek design of the LightTuck makes taking your holster on and off throughout the day a breeze! No need to undo your pants every time you put your gun on. The precise design also makes the retention consistent both on and off your body, keeping your weapon securely holstered while stored in a safe location.

Features Vedder’s 1.5″ rock solid spring steel clip which is tuckable, yet adds a minimal amount of bulk. This leaves virtually no print along your beltline for the most discrete carry option compared to bulky plastic clips. You spend a lot of your hard earned money on a firearm, so it makes sense to want a quality holster to carry it in. Quality doesn’t have to cost a fortune, but often we get what we pay for. Vedder Holsters provides the best possible quality holsters at an affordable price and never cuts corners when it comes to quality and service.


Comp-Tac Spartan Holster – 1.5″ Black Standard Clips


Comp-Tac is pleased to offer gear made by Minotaur Holsters, a new company specializing in kydex/leather hybrid holsters. These holsters combine the speed and one-handed reholstering capability of kydex with the comfort of leather. The Spartan is a “meat and potatoes” economy version of the MTAC. The Spartan is tuckable, you can adjust the cant, and you can get additional kydex half-bodies for different weapons, all like the MTAC. It’s not as pretty, and the fasteners aren’t covered, but it’ll save you a few dollars. The Minotaur Spartan uses the same clips as the CTAC and the MTAC. Additional kydex bodies can be ordered (Spare Minotaur Bodies) but they are NOT the same as those used on the Gladiator and MTAC holsters. This holster utilizes the same kydex clips as seen on the Comp-Tac CTAC holster, which allow you to adjust the cant. With the clips offset from the holster body, the holster disappears when you tuck your shirt between the holster and your pants. The “Slide” version allows you to use one holster for similar guns of different lengths (such as Glock 9mm, .40, and .357’s). The Slide is typically slightly longer than the shortest gun of the series, and left open so the excess barrel length on longer guns can “slide” through the end of the holster.

A “Full-Coverage” version can be ordered by selecting your specific gun model. Also, the Kydex half-bodies (made by Comp-Tac) are interchangeable, so you can order additional holster half-bodies to set your holster up for a different gun. Please remember they fit check every single holster with the actual make and model firearm ordered. As a result, the leather backing may show slight wear marks or scratches from the fit process.


Vedder Holsters ComfortTuck Leather Kydex Hybrid Gun Holster – Bersa Thunder .380 (Black Leather with Black Kydex)


Each ComfortTuck holster is made with premium cowhide leather which is ideal for dispersing the pressure points that guns create against your body. Each piece of leather is hand selected and sized specifically to fit your firearm making it the most comfortable way for all day carry whether you’re sitting or standing. Durable kydex that is designed to hold up to the most extreme conditions and is hand molded to fit your individual firearm. Includes clearance for all front sight channels and loaded chamber indicators. Black powder coated spring steel clips that are adjustable for ride height and cant are extremely strong and durable. The black powder coated spring steel clips are rust and scratch resistant and blend in well against your belt. You want your firearm to be concealed and the last thing you want is to bring attention to your belt line with shiny or logo stamped clips telling the world you’re hiding a gun under your shirt. Accommodates belts up to 1 3/4″ wide. High-density spacers placed behind each clip allows for easier tucking. This, coupled with our soft backed steel clips virtually eliminates any potential for squeaking of metal against leather. Handcrafted to fit your specific gun model in the U.S.A. and backed by Vedder Holsters’ 30 day money back guarantee and lifetime warranty.


Bersa Thunder 380 IWB Hybrid Holster with Adjustable Retention Black Arch Holsters ACE-1

SHTF Gear ACE (always combat effective) holsters provide the perfect combination of comfort and rapid deployment for concealed carry. That’s because each of our holsters is precision molded for your specific gun and built by hand. The new ACE-1 Gen 2 holster includes our proprietary comfort curve: a unique feature developed over months of testing that provides superior comfort. This is achieved by molding the kydex so that it creates a curve in the back of the holster. This curve allows the holster to fit the body more closely, increasing comfort and bringing the grip closer to the body for better concealment.

Other new features of the ACE-1 Gen 2 include user-adjustable retention for greater reliability, thicker kydex for maximum durability, increased Kydex coverage for a more secure fit, higher density leather for improved wear, and a flared opening for easier holstering. While this second generation holster offers several design changes, it maintains all of the unique features that made the original ACE-1 a leading hybrid holster: durable kevlar stitching, precision-formed kydex, premium American leather, beveled edges, adjustable carry height and cant, sweat guard cut for a full grip, and availability for over 200 different handguns. If you purchase this holster you will receive a lifetime warranty and 30-day satisfaction guarantee.


If you have a Bersa Thunder and are in need of an IWB holster, we recommend the first holster on this list. It’s the Texas Leathercraft Right Hand – Tucker & Byrd L2 Leather Tuckable IWB Holster – Bersa 380 Thunder.

That’s the end of our list. Did we miss any concealed carry IWB holsters for the Bersa Thunder? If so, please leave a comment below and we’ll take a look!

Leave a Comment





This site uses Akismet to reduce spam. Learn how your comment data is processed.