We tried out several different Beretta Nano holsters and came up with this list of the 8 best Beretta Nano IWB holsters. We prefer inside the waistband (IWB) holsters because they hold your gun securely, are easily concealable and highly comfortable.
The Beretta Nano is a great concealed carry weapon and it’s an amazing concealed carry gun.
Let’s begin with our favorite and the one we recommend.
To make the holster more contoured to the body and streamlined a thinner .080 material was used instead of the original .093. The distance between the belt loops helps for more stability. There is one tension screw which results in less material. On the body, contact side, all areas possible have been contoured which provides comfort and eliminates hotspots. The holster is non-collapsible and aids in a faster re-holster.
The L-2 IWB is a very comfortable, highly concealable inside-the-waistband holster. It is a tuckable holster that features adjustable cant and ride height and runs best right over your hip pocket.
It is a simple, long lasting and sturdy. It is also lightweight so it will not make it hard to walk, run, jog, or jump! The handgun will fit comfortably and will not fall out when bending over. It should provide you years of service and will be able to tolerate all types of weather along with tough handling.
Winthrop Holsters 0063 AND 0015 – Beretta Nano IWB Dual Snap Holster And Single Stack Magazine Holder R/H Black
This is a custom handmade Black Holster for the Beretta Nano IWB dual snaps. This holster was made for inside the waistband, it has 1.5″ Belt Loops. This holster is made for the right hand shooter, left available as a custom order. We use 7 to 8 oz. premium Hermann Oak vegetable tanned cowhide leather, wet molded to fit the gun. Our recommended wearing position is 3:30 – 4:00; positioning the front of the holster with the side seam of your pants, the back of the holster towards your back pocket.
The L-4 IWB is a very comfortable, highly concealable inside-the-waistband holster. It is a tuckable holster that features adjustable cant and rides height and runs the best right over your hip pocket.
It is simple, long-lasting, and sturdy. It is also lightweight so it will not make it hard to walk, run, jog, or jump! The handgun will fit comfortably and will not fall out when bending over. It should provide you years of service and will be able to tolerate all types of weather along with tough handling.
Behind-the-hip (4 o’clock position), tuckable, adjustable cant, slim profile, and adjustable ride depth, there is no way you can go wrong with this holster. This “hybrid” holster combines cowhide leather backing with a Kydex half-shell mounted on the leather. The leather backing provides the desired comfort achieved by leather holsters. The Kydex half-shell provides reliable, consistent draw and re-holstering capabilities. Adjustable cant and ride depth the clips on the MTAC can be re-positioned to ride higher or lower on the holster. This allows the cant (angle) to be adjusted more or less depending on user preference. The ride depth can also be adjusted in the same manner. The interchangeable clips can be swapped out for different styles, colors, and belt widths.
Customers all over have written positive reviews about this holster.
The all-new LightTuck holster by Vedder Holsters is the last holster you will ever need to buy for your carry gun. Each holster is handcrafted to your precise gun model to create the perfect fit while maintaining the thinnest profile both in your pants and on your belt. Our fit is so precise, you will hear an audible ‘click’ every time you holster your gun, reassuring you that it is securely in place. Every LightTuck holster now comes with three adjustable ride height settings, 30 degrees of adjustable forward AND reverse cant angle (great for 3-5 o’clock carry, appendix, and crossdraw), and adjustable retention to meet your exact preference. Carry precisely the way you want with the LightTuck and to be comfortable and confident every time you carry it! The sleek design of the LightTuck makes taking your holster on and off throughout the day a breeze! No need to undo your pants every time you put your gun on. The precise design also makes the retention consistent both on and off your body, keeping your weapon securely holstered while stored in a safe location.
Features Vedder’s 1.5″ rock-solid spring steel clip which is tuckable, yet adds a minimal amount of bulk. This leaves virtually no print along your beltline for the most discreet carry option compared to bulky plastic clips. You spend a lot of your hard-earned money on a firearm, so it makes sense to want a quality holster to carry it in. Quality doesn’t have to cost a fortune, but often we get what we pay for. Vedder Holsters provides the best possible quality holsters at an affordable price and never cuts corners when it comes to quality and service.
This is a snug IWB holster, and it’s fairly comfortable. We suggest you wear it about 4:30 – 4:45 and it should be very comfortable. Of course, that depends how you use you are going to handle your gun on that particular day. If you are looking for a 15-degree cant than you’re in luck. Put the weapon just where you wish for your draw, and the pistol clicks firmly and securely into place. It’s not going anywhere without a firm draw from the operator. But you won’t damage your front sight (glock–plastic) because the holster features a generous channel to avoid wear.
The clip will fasten the holster very securely to your belt. The holster material will not absorb sweat, such as in humid climates, the sweat will roll right off of the holster and will not damage the holster in any way. This also means this holster is also good for any kind of day, no matter the weather. Finally, the reverse tab at the bottom of the clip makes it easy to remove the holster when you’re ready to put it aside.
Comp-Tac is pleased to offer gear made by Minotaur Holsters, a new company specializing in kydex/leather hybrid holsters. These holsters combine the speed and one-handed reholstering capability of kydex with the comfort of leather. The Spartan is a “meat and potatoes” economy version of the MTAC. The Spartan is tuckable, you can adjust the cant, and you can get additional kydex half-bodies for different weapons, all like the MTAC. It’s not as pretty, and the fasteners aren’t covered, but it’ll save you a few dollars. The Minotaur Spartan uses the same clips as the CTAC and the MTAC. Additional kydex bodies can be ordered (Spare Minotaur Bodies) but they are NOT the same as those used on the Gladiator and MTAC holsters. This holster utilizes the same kydex clips as seen on the Comp-Tac CTAC holster, which allow you to adjust the cant. With the clips offset from the holster body, the holster disappears when you tuck your shirt between the holster and your pants. The “Slide” version allows you to use one holster for similar guns of different lengths (such as Glock 9mm, .40, and .357’s). The Slide is typically slightly longer than the shortest gun of the series, and left open so the excess barrel length on longer guns can “slide” through the end of the holster.
A “Full-Coverage” version can be ordered by selecting your specific gun model. Also, the Kydex half-bodies (made by Comp-Tac) are interchangeable, so you can order additional holster half-bodies to set your holster up for a different gun. Please remember they fit check every single holster with the actual make and model firearm ordered. As a result, the leather backing may show slight wear marks or scratches from the fit process.
If you have a Beretta Nano and are in need of an IWB holster, we recommend the first holster on this list. It’s the Blade-Tech Nano IWB Gun Holster (Black).
That’s the end of our list. Did we miss any concealed carry IWB holsters for the Beretta Nano? If so, please leave a comment below and we’ll take a look!